Hi,
I used a Kreem gas tank restoration kit on my Yamaha XS650. Seemed to work
ok. But how do I get rid of the chemicals? I have a bucket (polyethylene)
full of about 3 gallons of the "prep A" fluid. I think it is muriatic acid.
It's dulited with water (you mix it with water before etching the tank in
the first step).
Would appreciate any suggestions. I live in the country and am on a septic
system.
Thanks.
e - 03 Dec 2006 00:54 GMT
>Hi,
>
[quoted text clipped - 8 lines]
>
>Thanks.
call your local landfill and see what they have for
recycling chemicals. your fire department may know also.
generally it's ok to dump, but i don't know about in a
septic...might eat pipes.
ke8yy - 08 Dec 2006 17:21 GMT
Put the acid in a large non-reactive container (like a polyethylene
bucket). Put on goggles and gloves and SLOWLY the solution sprinkle
with baking soda. It will bubble and release heat, hydrogen and oxygen
as the acid and soda react. When it doesn't bubble any more, the acid
is neutralized and you should be left with a solution of salt water. I
imagine if diluted sufficiently that could go through your septic
system.
The reaction is:
2HCl + 2NaHCO3 -> 2H2 + 3O2 + 2NaCl
mike
http://mind.dreamhost.com
> Hi,
>
[quoted text clipped - 8 lines]
>
> Thanks.
ke8yy - 08 Dec 2006 18:04 GMT
Put the acid in a large non-reactive container (like a polyethylene
bucket). Put on goggles and gloves and SLOWLY the solution sprinkle
with baking soda. It will bubble and release heat, hydrogen and oxygen
as the acid and soda react. When it doesn't bubble any more, the acid
is neutralized and you should be left with a solution of salt water. I
imagine if diluted sufficiently that could go through your septic
system.
The reaction is:
2HCl + 2NaHCO3 -> 2H2 + 3O2 + 2NaCl
mike
http://mind.dreamhost.com
> Hi,
>
[quoted text clipped - 8 lines]
>
> Thanks.