yamaha blaster

Thread view:

Enable EMail Alerts

Start New Thread

Thread rating:

mmhorsin@peoplepc.com - 26 Dec 2006 20:43 GMT

Would anyone have an idea why I can get blaster cranked but when you try to
use throttle it cuts off like it is getting too much gas and where would be
a good place to get a service manual?
Steve

--

Reply to this Message

GaZ - 26 Dec 2006 21:42 GMT

> Would anyone have an idea why I can get blaster cranked but when you try
> to use throttle it cuts off like it is getting too much gas and where
> would be a good place to get a service manual?
> Steve

Look at the plug to see if it is ( too rich)

Sounds like carb jets blocked

Reply to this Message

Steve Baker - 27 Dec 2006 18:12 GMT

> > Would anyone have an idea why I can get blaster cranked but when you try
> > to use throttle it cuts off like it is getting too much gas and where
[quoted text clipped - 4 lines]
>
> Sounds like carb jets blocked...

...and sometimes carb fuel bowl needle valves stick in their borings. A
good carb/fuel injector cleaner might help with what ails it. Also make
sure the choke is not malfunctioning (staying too open or too closed,
depending on weather/temperature conditions). Good luck.

Al

Reply to this Message

Motorcycle Forum / General / Yamaha / December 2006

yamaha blaster