| Thread | Last Post | Replies |
|
| Mystery Yamaha Engine (identify this engine please) | 31 Aug 2004 17:05 GMT | 19 |
This is an engine I bought at a yamaha auction, with several other parts. What is it from? I think it had 2400cc on the case. http://tinypic.com/37ara http://tinypic.com/37arq
|
| TZR250 Exhaust | 31 Aug 2004 16:31 GMT | 1 |
I need a new exhaust for my 1990 TZR250 in the UK best I can find at the moment is over £600 any ideas?
|
| F.S R1100GS BMW | 31 Aug 2004 15:29 GMT | 3 |
1994 R1100GS BMW for sale. New Tires, Comes with Hard Bags, Windshield. Excellent Condition. Phone -709-364-2152 (Newfoundland)
|
| V-Max Tires | 30 Aug 2004 02:15 GMT | 4 |
I need to replace the rear tire on my '89 vmax (sheetrock screw). I saw on a website somewhere a recommendation for the Michelin Macadam 50. However, the mechanic at the local Yamaha dealer showed me a set of new Macadams he had just taken off another customer's vmax. He said ...
|
| V-Star 1100 Tires | 29 Aug 2004 23:40 GMT | 5 |
I have just over 10,000km on my V-Star 1100 Classic, and the rear tire is wearing thin. I figure maybe another 2000km. This is OE Dunlop tire. Although it does not seem like I got much mileage out of it, I must
|
| XS 750 forks | 29 Aug 2004 13:38 GMT | 3 |
I've just reconditioned my forks on my xj 550 and found out that they are from an xs 750 bike ,the job is done now but I do not know how much fork oil to put in, dose any body know. The bike shop that I got the fork oil from said that it is 170cc each fork,
|
| Got tired of waiting on Yamaha. Got a Honda | 29 Aug 2004 12:49 GMT | 2 |
I finally tired of waiting on the new V-Stars to come out here in Florida. Today they told me another month so I bought a Sabre instead. Lots of good information in this forum and all have been helpful BUT
|
| vstar 650 gas leak | 28 Aug 2004 17:52 GMT | 2 |
After getting my 2003 650 vstar out of winter storage, I had a gas leak due to the carbs needing to be cleaned. Even though I drained the gas and did the winter storage stuff.Had dealer clean it, worked fine. But now after sitting for about 3 weeks, same problem. The bike started ...
|
| What tyres for an XJ600 (Pre-Diversion)? | 28 Aug 2004 15:45 GMT | 1 |
The back tyre on my XJ is just about done and I am now looking for another brand. It is shod with Michelin Macadams at the moment and I have to say they are the worst and most uninspiring, confidence sapping tyres I have ever tried. Especially when it's raining.
|
| yamaha fzr600 original decal set wanted! | 25 Aug 2004 19:55 GMT | 1 |
yamaha fzr600 original decal set wanted! I am currently looking for a original factory white, red, blue decal set for my Yamaha 1993 FZR 600 decal which looks like http://vustase.free.fr/IMAGES/FZR600.JPG
|
| Apologies | 24 Aug 2004 17:08 GMT | 1 |
My apology for posting the pictures. I am on another couple of newsgroups, running and forsale stuff, that we occassional post pictures with our messages. I also wasn't paying attention to the size of those pictures. I was hurrying and my apolgies. It won't happen again - At least ...
|
| hello any uk owners here ?? | 24 Aug 2004 12:47 GMT | 8 |
just checking out this group and wondering if any uk owners here as seems to be mainly USA....
|
| 1991 XT600 running rich | 24 Aug 2004 11:50 GMT | 1 |
I got this bike about a month ago and all was fine. I just did some basic tune up stuff (oil, filters, plug). I pulled out the old plug that looked like it had been in there since 1990. ;) The electrode was quite worn but the plug was clean. I replaced it. The old air filter
|
| Question on yamaha 500 | 23 Aug 2004 17:49 GMT | 1 |
i have an old flat track, fromm the 70's, i trying to restore he motor first, it has a dry sump oil system, my question is as follows, where if any is there a check valve in the system that would control , or draining of the oil from the reservoir down in the engine after it shut
|
| VStar Oil Change Revisited | 23 Aug 2004 16:50 GMT | 24 |
This was discussed a few weeks ago and no doubt has been the subject of conversation for the last several years. Simply put, the mechanical engineer (s) who designed the location of the VStar's oil drainplug ought to be taken out to the nearest field and shot. They are, no doubt, ...
|